Fugly

 

A wheel that wide on a 9000 you will almost certainly have to do some bodywork to make fit.

 

Same wheel? I like the Ronal R10's (c900 in the pic) a bit more.

 

I wish you would have not posted that picture of the ronal turbos on the C900.

 

I've always like the R10 on c900s. Might look OK on a lowered 9000 in 17" size.

 

love em!!!!

 

would look best on a CC I think, but go ahead, whatever you have! I run fairly wide 17" rims, and they rub against some kind of bar in the back suspension area (don't know how to explain any better)

 

Well I have a boxy style 9000 and I know it'll look good. It's just that feeling you get.

Would a spacer help avoid the rubbing in the rear.

 

Well I have a boxy style 9000 and I know it'll look good. It's just that feeling you get.

Would a spacer help avoid the rubbing in the rear.

On the inside, yes...then the problem becomes the fender/wheel arches.

 

Little Red wants.

 

I find those ronals look more attractive

 

Yeah I think I can work around that but after seeing the ronals I might reconsider

 

get lower offset and make them fit with stretched tires!!! the flares on a 9000 are massive and stock wheels are sunk, no reason you shouldn't be able to fit decent rims. who cares if you have to cut the plastic inner fender..

 

With 7.5" wide wheels and a 225 tire I had to trim the fender flares on the outside AND modify the e-brake cable brackets on the inside.

 

I also had to trim the inside plastic fender arches. There is a good amount you can take off. 225/45/17 7in wide

 

what offset/backspacing tho.. with lower offset it will bring the rim away from the inside well
http://forums.240sxone.com/showthread.php?t=9057

there is a set of steeda 17x 7.5 4x108 wheels on here 160 for the set!!!!!

 

Yeah I made up my mind and I'm going to go with the r10s with a slammed look.