Time to clean out some Saab bits and a car! I'd prefer to sell local and avoid shipping. But if you are seriously interested, we can chat. I am located in the Seattle, WA area.
Viggen stock exhaust system: $350
This is the original exhaust shipped on my 2002 Viggen. Was only in use for 1.5 years/17k miles when swapped for a complete BSR setup. miles. Fits 99-02 Viggen. Not sure if it can be used in other applications without modification.
![Image]()
Viggen stock rear sway bar: $50
Nothing much to say here except it is still in great condition. Fits any NG900/9-3 94-2002. Beefier than anything that shipped on non viggen models.
Abbott Racing 2 point front sub frame brace: $125 (sells new for $250)
Good compliment to the Viggen Rescue Kit. Some minor scuffing, but still in mint functional condition. Fits 94-04 NG900/9-3. Note: This bar won't fit well if your car has a 3"+ downpipe or something else down there. You'd have to use spacers and longer bolts to make it fit. In my opinion, it reduces road clearance to an unacceptable level. (Hence the minor scuffing)
http://www.abbottracing.com/product/9-3 Chassis/Stainless-Steel Subframe brace (SAAB 9-3)/
![Image]()
![Image]()
1994 900 SE 5-speed manual transmission: $2750
![Image]()
![Image]()
193k miles on the drive-train
Full service history of the car (service performed at Scanwest Auto for past 5+ years)
"Forrest Green"
Tan leather interior, 6 CD changer in the boot, moonroof, power/heated seats (drivers side needs new heat element to work)
Paint in fair condition: was originally an east coast car (minimal rust however, super close up pics on request)
16" Rims + Bridgestone Potenza RE950's with minimal wear
Brakes at 70%
All hoses and belts OK.
Small radiator leak (have to barely top off every month or two)
Rebuilt head installed at 144k miles
New DI, NGK spark plugs and cooling fan installed at 192k miles
All original tools/jack/donut-spare included.
Will include car cover, Hanes manual and all service records
Mods:
Saab Sport Exhuast (stainless steel)
Front control arm assemblies replaced with MY96 upgrade kit
Abbott poly bushings throughout the car
You can find larger images here: http://flickr.com/photos/timsatterfield/sets/72157605668925552/
Viggen stock exhaust system: $350
This is the original exhaust shipped on my 2002 Viggen. Was only in use for 1.5 years/17k miles when swapped for a complete BSR setup. miles. Fits 99-02 Viggen. Not sure if it can be used in other applications without modification.
Viggen stock rear sway bar: $50
Nothing much to say here except it is still in great condition. Fits any NG900/9-3 94-2002. Beefier than anything that shipped on non viggen models.
Abbott Racing 2 point front sub frame brace: $125 (sells new for $250)
Good compliment to the Viggen Rescue Kit. Some minor scuffing, but still in mint functional condition. Fits 94-04 NG900/9-3. Note: This bar won't fit well if your car has a 3"+ downpipe or something else down there. You'd have to use spacers and longer bolts to make it fit. In my opinion, it reduces road clearance to an unacceptable level. (Hence the minor scuffing)
http://www.abbottracing.com/product/9-3 Chassis/Stainless-Steel Subframe brace (SAAB 9-3)/
1994 900 SE 5-speed manual transmission: $2750
193k miles on the drive-train
Full service history of the car (service performed at Scanwest Auto for past 5+ years)
"Forrest Green"
Tan leather interior, 6 CD changer in the boot, moonroof, power/heated seats (drivers side needs new heat element to work)
Paint in fair condition: was originally an east coast car (minimal rust however, super close up pics on request)
16" Rims + Bridgestone Potenza RE950's with minimal wear
Brakes at 70%
All hoses and belts OK.
Small radiator leak (have to barely top off every month or two)
Rebuilt head installed at 144k miles
New DI, NGK spark plugs and cooling fan installed at 192k miles
All original tools/jack/donut-spare included.
Will include car cover, Hanes manual and all service records
Mods:
Saab Sport Exhuast (stainless steel)
Front control arm assemblies replaced with MY96 upgrade kit
Abbott poly bushings throughout the car
You can find larger images here: http://flickr.com/photos/timsatterfield/sets/72157605668925552/
