Saab Link Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·




So I'm sure many of you already know about this mod but I just did it and couldn't be happier with the results. I found out about it on ericsaabsite.com but wanted to throw in my 2 cents too.

The whole process took me about 40 minutes. The lights come out very easy, just one torx screw (i used an smaller allen key to get it out) and it slides straight out the front. The lights twist and pop right out. The Amber inserts are just glued in around the edges of the lenses so they are easy to pop out. I just pried them off with a small flathead screwdriver. The hardest part is you have to break the insert into chunks inside the light so you can pull it out. I used heavy duty wire cutters and long nose pliers but it was still a bit tedious. I think the end result looks awesome and definitely beats the $176 you'd pay to buy a set of clears.

Hope this helps someone. Feel free to ask questions if you are doing this.

(Pics stolen from ericsaabsite.com)
 
1 - 4 of 4 Posts
Top