Saab Link Forums banner
1 - 20 of 36 Posts

·
Registered
Joined
·
393 Posts
Discussion Starter · #1 ·
I've been doing some reseach on rims and I came across a thread on another forum about some Audi & Volvo rims fitting on our car even though it's not the exact 110 bolt pattern.

I really like these Volvo Pegasus rims in 17"x8 with a 108x5 bolt pattern.


But I still can't figure out if these will actually fit.
Does anybody here actually know for a fact?
thanks a lot

ps: '99 9-3 5x110 bolt pattern, lowered 1.5"
 

·
Registered
Joined
·
1,044 Posts
Pretty sure a few people have run pegs with wobble bolts or something. I, too, think they look pretty slick. Someone else with more experience should chime in, though
 

·
Registered
Joined
·
393 Posts
Discussion Starter · #4 · (Edited)
Pretty sure a few people have run pegs with wobble bolts or something. I, too, think they look pretty slick. Someone else with more experience should chime in, though
yeah I just wanna find someone who can tell me a thing two about it. who have done it or have wobble bolts?

How safe/vibraton causing are they?
 

·
Registered
Joined
·
393 Posts
Discussion Starter · #6 · (Edited)
17x8, et 35, lip size is 2" (fronts)
17x10, et 30, lip size is 3" (rears)
17" rims, staggered fitment, 5x112

Would these rub?
Flaring fenders would solve this, is this possible?
 

·
Registered
Joined
·
3,348 Posts
There have been 2 or 3 people on here that ran these with wobble bolts. They worked 100% according to them and they didn't have any problems. No adapters are needed.

Do a search for that rim under the ng900/og9-3 section here and I'm sure you'll get some threads to look at.
 

·
Registered
Joined
·
393 Posts
Discussion Starter · #8 ·
Thanks for the tip mark.
I didn't find much other then somebody having them the actual car with pics.
But I did find the bbs wobble bolts for 110 to 112/108

BBS part #'s
09.30.307 for a kit of 4
09.23.556 for single ones

Gatta order them over the phone I guess.
 

·
Registered
Joined
·
3,348 Posts
Thanks for the tip mark.
I didn't find much other then somebody having them the actual car with pics.
But I did find the bbs wobble bolts for 110 to 112/108

BBS part #'s
09.30.307 for a kit of 4
09.23.556 for single ones

Gatta order them over the phone I guess.
Cool. And yeah that is all that you should need. I would double check the hub sizes though in case hubcentric rings are recommended.
 

·
Registered
Joined
·
393 Posts
Discussion Starter · #10 ·
When I was researching wobble bolts/shuffle bolts/PCD displacement bolts or w.e

I've read that they are SAFE to use if you're using your original hub, hub centric ring + wobble bolt = not a good idea... too much modding.

unless somebodys done it on here and can say they're fully safe with it i wont go the path to modify both.
 

·
Registered
Joined
·
2,950 Posts

·
Super Moderator
Joined
·
6,731 Posts
Is that 9-5 Aero Stock ride height?
 
1 - 20 of 36 Posts
Top