[amish_geek]

"Shadow" Louvres for C900's

$90 + shipping obo

Located in Duluth MN

http://amishgeek.com/external/saab/parts/IMAG0282.jpg
http://amishgeek.com/external/saab/parts/IMAG0283.jpg

 

[dan-the-kid]

Got mounting hardware?

 

[amish_geek]

What you see is what you get... thus the obo.

 

[kmbaer04]

Whats this measure? Height x Width?

 

[amish_geek]

Take a tape measure and measure the window on your classic 900. It's slightly larger than that.

 

[kmbaer04]

Awesome thanks for the reply

 

[amish_geek]

bump!

 

[BurnsSide42]

Wish these fit a c9000 Bump for good price!

 

[tucksayre]

Hatch or sedan?

 

[amish_geek]

Hatch.

 

[amish_geek]

Here is a picture of the same style louvres on my SPG... (I have 2 louvres, one on my SPG, and on that I am selling).

 

[dan-the-kid]

If there was info out there on mounting, I may pick this up.

 

[amish_geek]

The louvres have a set of hinges at the top, and 2 clips at the bottom. The hinges on the set I'm selling are slightly different than the hinges on the one on my SPG.

My SPG had thin flat hinges with no holes. I had to pry up my weather stripping and use a special 3M double stick tape to fasten the metal hinge to the top of the window, and then re-install the weather stripping over the hinge.

http://amishgeek.com/external/saab/parts/IMAG0312.jpg

The hinges on the one for sale:
http://amishgeek.com/external/saab/parts/IMAG0323.jpg

At the bottom corners are 2 clasps which swivel and click onto a stud which gets glued/double-stick-taped to the glass to hold it down.

Here is is on my SPG:
http://amishgeek.com/external/saab/parts/IMAG0313.jpg
http://amishgeek.com/external/saab/parts/IMAG0314.jpg
http://amishgeek.com/external/saab/parts/IMAG0315.jpg
http://amishgeek.com/external/saab/parts/IMAG0316.jpg
http://amishgeek.com/external/saab/parts/IMAG0317.jpg
http://amishgeek.com/external/saab/parts/IMAG0318.jpg
http://amishgeek.com/external/saab/parts/IMAG0319.jpg
http://amishgeek.com/external/saab/parts/IMAG0320.jpg

The clasps are intact and look good/swivel just fine on the one for sale:
http://amishgeek.com/external/saab/parts/IMAG0321.jpg
http://amishgeek.com/external/saab/parts/IMAG0322.jpg

I just don't have the plates with the studs that glue to the bottom of the window for it to clasp onto.

 

[amish_geek]

You know you want them! Bump

 

[Patton]

If I thought I could get away with buying parts for a car I don't have, yet, I would buy it. As is, it would look a little strange on my convertible

 

[amish_geek]

If I thought I could get away with buying parts for a car I don't have, yet, I would buy it. As is, it would look a little strange on my convertible

These would make your convertible look totally badass. A little work with a dremel and you could make them fit!

 

[amish_geek]

To the top BUMP!

 

[Nash]

Here is a picture of the same style louvres on my SPG... (I have 2 louvres, one on my SPG, and on that I am selling).

Do you have a louver for sale?