Did you turn the car on at any point with no seats in/connected?

 

Yes I did.

 

That set the light/codes. They should clear with a few drive cycles, otherwise you need a tech II to clear it.

 

Air bag lights don't usually clear themselves.

Glad you got it all set.

 

Thanks man,I took ur advice and had a tech run the tech2...
All good now,he also changed the settings on daylight running,so I can now have the corner light on with the fog light,without turning the head light on

 

Suddenly my light came on. After reading a lot on the forums went to the passenger side seat and looking under it I saw the following diconnected plugs . One is green and the other is grey and they are close to the famous yellow airbag connector. Should I plug them? Should I unplug battery before I do that?
By the way the car is a 2003 9 3 convertible

 

Don't just plug them in. Check what they are for and go from there. Do they appear to be able to plug into one another and are the same number of wires on both connector? Someone with a new 9-3 should comment but I wouldn't just plug them in randomly until you know what they both go to.

 

When I plug the two connectors the seatbelt light goes on. I then buckle up the passenger as well as driver seat and they still stay on. Now is the airbag plus the seatbelt plus the warning light. Christmas spirit must be....