Saab Link Forums banner

85 SPG Project

56K views 363 replies 56 participants last post by  DustinS  
#1 · (Edited)
My brothers and I just picked up an 85 SPG today, and figured I'd start a project thread. The body is very solid, there is some surface rust on the door bottoms and a small patch in the spare wheel well, should be pretty easy to take car of that stuff. To get the car running we need a new APC unit(just ordered) And the pinion bearing in the tranny is bad. The tranny will be coming out to get new bearings and I might also get a steel diff cover and run a transmission oil cooler. Once the car is running the bumpers will go on and it will need some cleaning up.

Here is a list of current mods from the PO:

-Centerforce clutch
-Garret t3/t4 hybrid turbo
-front mount intercooler
-phantom grip L.S.D. differential
-3" turbo back exhaust system
-Koni adjustable shocks and Swedish Dynamics springs

Future plans include a T5 conversion.

http://picasaweb.google.com/pbelperr

Image
 
#6 · (Edited)
I spy an erebuni kit... I've heard horror stories of getting those things to fit properly. Hopefully you won't have to much of a hard time!

Anyways, it looks to be a solid buy for the price it was listed for. The body looks to be relatively solid from the pictures with only a little minor surface rust (that I can see anyways). Also, did you disconnect all of the stuff in the engine bay, or was it like that?

Also, so that was YOU in the Burke hill climb video I was watching on youtube. I was wondering whose 9k Aero that was! Ever been to the Mt. Ascutney hill climb? Most of the cars in the Burke video go to the Ascutney one as well. Some of them are actually from Claremont ;).
 
#7 ·
I havn't decided if I am going to use that kit yet, the car came with all of the stock trim pieces, except a rear bumper. If I can source one of those I think I wont use the erebuni kit.

Last season was my first hill climb season, I did Burke and Okemo. That aero was totaled two weeks before ascutney, so I missed it. I plan on running all the events this year. Most people seem to go to all of them, everyone is pretty cool too. Do you ever go to Ascutney?

The pictures show the car as I picked it up, with stuff disconnected. The rust that is there is all surface stuff. He put it on a lift, and the underside and frame rails are all really solid.
 
#22 ·
Last season was my first hill climb season, I did Burke and Okemo.
Okemo has a hill climb now? I used to race my 1980 900 Turbo up that mountain all the time back in 1990/1991 when I lived in Ludlow. I miss those roads but racing around the lakes there in town was better :D
 
#8 ·
Nice... as long as the control arms / cv shaft tunnels are solid, you should be golden.

As for Ascutney, I haven't raced there, but I have spectated. I might do a hill climb this year though, I really want to! Plus, Ascutney is only about 8 minutes from my house, and Okemo is only 25 - 30 min.