Saab Link Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 7 Results
  1. Car Problems? Classic 900 Only
    hey, guys. i bought this car in not running and pretty rough condition. i replaced the dizzy and it fired right up and ran like in the video. and then yesterday (when i took this video) i replaced the master clutch and brake cylinder. once i was finished i went to start it and it wouldn't fire...
  2. Site Help and Suggestions
    Hello all. Recently i have discovered my 9-3 convertible (the car is a 1.8t vector) has a broken front left spring, not a huge problem but still not very convenient. I have had the car for little over 3 months, and what i noticed very early on is how firm - borderline harsh, the suspension is...
  3. General 9-7X Posts and Information
    When the weather started getting cold (below 40 degrees), the 9-7x has had issue starting and it idles weird. Starting, it is really slow to turn over and occasionally has a loud knock on start up. When it idles, it has this clunking sound that goes in beat with the engine. I also noticed the...
  4. General Classic 900 Posts and Information
    Ok, so I've been noticing the rust on my c900 a lot recently. It's the worst on the right front wheel well. I took some pictures. As you can see the other wheel wells aren't TOO bad, and the under side of the car isn't too bad either. And inside the spare tire area, isn't too bad either. I want...
  5. Car Problems? NG900 or old 9-3 Only
    Ok, a quick background. 2002 Saab 9-3. Shredded the Serpentine belt about 6 months ago and had that and the tensioner, etc replaced. Now it's making a weird whining sound that makes me feel like my car is an airplane. When I take off or rev the engine in idle you can hear it whir up. Hard...
  6. Car Problems? NG900 or old 9-3 Only
    Urgent!!!! Major GS Short Shifter install problems - please delete I need help in a bad way. I'm at my buddy's and just put the GS short shift kit in and bolted it down. I put the key in to test everything out and I get a "key not recognized" message on the SID and the key is stuck in the...
1-6 of 7 Results
Top