does any know how to do remove the yellow piece on the clear corners? i havnt taken them off yet but it looks like its just a little yellow reflector atached. maybe even a film i can blade off. any links would be apreciated
Diy Clear corners
Turboviggen
21 - 27 of 27 Posts
Joined
·
1,079 Posts
troll speed you have 18x8 with 35 offset on? with what tires? i want to put 225 on my car that has 17x8 with offset of 35 but didntwant to rub. i am lowered also, think i will rub with 225 45 17 with offset of 35?
back onto the diy corners. i heated my reflectors up with a hair dryer for a while to soften the glue a bit. then took long flat head with a bit of electrical tape on the end to reduce chance of scratching, put it between the reflector and lens and twist and it popped off then broke it up with small needle nose pliers to get it out. all in all i am so glad i did, looks much better, and very easy to do.
back onto the diy corners. i heated my reflectors up with a hair dryer for a while to soften the glue a bit. then took long flat head with a bit of electrical tape on the end to reduce chance of scratching, put it between the reflector and lens and twist and it popped off then broke it up with small needle nose pliers to get it out. all in all i am so glad i did, looks much better, and very easy to do.
Joined
·
1,079 Posts
I gots 215 40's
Joined
·
1,032 Posts
i was just thinking that! blue and orange...
except my car is red. so i am going out to do mine today.
21 - 27 of 27 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
