Saab Link Forums banner

carnage

1K views 9 replies 6 participants last post by  NahumCC 
#1 ·
so there was only a little chunk of alum stuck in the #4 intake valve other than that the engine itself is fine
IM going to put the harness under the manifold & all the nitrous nozzles & lines on top
take care
JAK
 
#8 · (Edited)


Got it done for you Jak. The easiest thing is to use the BBcode that we have to do this since you upload your images elsewhere. You just have to use "img"http://www.saabnet.com/tsn/members/photos/195/11372"/img" but replace the quotes with enclosing brackets, [], and whatever the url for the image is.
 
#9 ·
if someone knows where to host the pics so......

they can be seen here
I have 3 I tried to reduce their size but the file size was still to big
I also have the dyno slip from that day on the mustang :)
really awesome power curve it stays above 375WHP from 4000RPM all the way to 6500RPM :)
take care
JAK
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top