|01-01-2013 04:58 AM|
|mike d||nerr tells you that you the number of codes stores, Fcod tels you what the code is in hex format,, if you use a hex translator with the number fcod throws out, you will get the normal obd2 code out of it|
|12-26-2012 05:22 PM|
here's one document I find with google. it kiiinda answers the question on the very last page. not sure who created it, but it's somewhat helpful.
|12-26-2012 05:16 PM|
There's information out there for what the info is, but I always have such a hard time finding out which mode they're in. I found the Fcod, it's under mode-0, but my SID always defaults to mode-7
I have a code for DIC non-powered. I freaked for a minute, then realized it's likely from me cranking the car for a minute or two with the DIC unplugged to prime the power steering pump and make sure the serpentine belt was lined up when I just replaced the pump.
|12-26-2012 05:09 PM|
Sorry its from another forum. Just marking this post because I'm also interested in figuring out what all the readings OpenSID mean.
|12-26-2012 04:57 PM|
|12-26-2012 04:47 PM|
|oliversexpedition||Tag for interest.|
|12-22-2012 04:56 AM|
Open SID list by mode?
Is there one? I've got a Nerr=1, and I wanted to see what it was without one of the 'tards at autozone. Quick question is... what mode is Fcod under?
for better info, is there a link to an open SID "tree/flowchart"?
I thought I had it from a wiki, but I deleted the link since it was constantly "hacked".