|09-26-2008 04:13 PM|
I guess Eibach does make springs for NG's!
|09-26-2008 02:40 PM|
|liketheword||I had the red pads on my prior 9-3. Per JK's suggestion. I was always happy with them. Little to no dust. They have a nice bite and constant feel. The only complaint I have is that they preformed subpar in colder weather until they got a few stabs.|
|09-26-2008 02:15 PM|
|JK||I have greenstuff on my 9-3 and they are nowhere near the Redstuff on my 9000. I wouldn't bother with greens. I'll probably try either Hawk, or something that is low dust (the greenstuff are more dusty than my current set of Redstuff).|
|09-26-2008 02:06 PM|
Dip is our friend:
|09-26-2008 12:55 PM|
Ok, so I've found Eibach pro-kits on the internet and they can be had for about $250. The problem is they are for 98-02 9-3's. I'm guessing these would not fit my 97 900. Maybe they would fit 98 900's because the suspension design was changed in 98?
Can someone clarify this for me? and/or find me Eibach springs for a 97?
EDIT: If I can't get Eibach's, I'm leaning toward the Koni Springs that nick sells.
|09-24-2008 08:21 AM|
|mcrowley||I've got greenstuffs on my 96 w/Nick's slotted rotors, Goodridge lines & ATE super blue. Stops pretty well, but the ebc's are noisy. I'll probably go with something else next time.|
|09-24-2008 08:09 AM|
|Tweek's Turbos||Yes, I think I was the factor that got Alex into the Greenstuffs, I have them on the car again, but for shitzngiggles will try the stuff Nick sells next time.|
|09-24-2008 08:01 AM|
Ben, thats what I probably will do, I just want all the parts already bought and in my possession before I go back on the 20th of December. I plan on doing all this work the 21st. I want to get it all done and enjoy the car before I have to go back in january. I plan on installing new brakes/pads,bleeding brakes, MP 3" dp, and lower it.
Anyone had any experience with EBC Red/Green stuff? I've heard good things about them. My brother had green stuff them on his car and they stopped pretty well.
I just bought a Haynes manual for my car also. I plan on doing a good amount of work to it before I go back to school in January.
|09-24-2008 07:52 AM|
|8valvegrowl||I think ceramics are hard on rotors personally. I've got Hawk HPS pads on the front and rear of my car. Great pads all around, quiet, fade-free, great bite, and so far they seem pretty gentle on the slotted rotors.|
|09-24-2008 07:48 AM|
|Tweek's Turbos||I gave you my input. besides your at school now aren't you? Get the complete arm you need at the junkyard, and have Joey R. get you the brake parts cheap.|
|09-23-2008 01:00 PM|
get his rotors and pads (should total about $350-$400 for the sport slotted rotors and ceramic pads
get the Voigtland/Intrax springs he has. I have had them on my Tally since January of 2007 and haven't had any issues and i live in NH and use it all year through plus i drive through NY a lot to see my grandparents in Millbrook.
I am getting the Koni Dampers now as i want a little more but it is pretty good without it and drives/rides like a gocart.
|09-23-2008 12:58 PM|
Using the Akebono Ceramic pads (tirerack.com) for the last year.
Done about 10 events on them as well.
They are "ok" for track but will overheat. They are "ok" for street but not the best.
The perk is that they have literally zero dust.
|09-23-2008 12:55 PM|
|BluAero||Bump for input!|
|07-17-2008 04:04 PM|
I do need a spring, but I figured I would upgrade. I would rather go with lowering springs than viggen springs. I was thinking the Eibach Pro Kit. They say it complements stock damnpers. other lowering springs vogtland and h & r say that it will be underdampened with stock shocks.
EDIT: I'm putting together a list of where I should buy all of these parts. If anyone knows where I can get the Eibach pro kit lowering springs kit or a good price for brakes(eeuro is best so far) it would be appreciated. I also want a pad that doesn't give me a lot of brake dust. TIA!
Also, What pads are you guys using? Comments?
|07-16-2008 07:26 AM|
|Tweek's Turbos||Mark, I have a good spare spring if you need it quick. But if you are taking it all apart, may as well do the upgrade. Lemme know.|
|07-16-2008 07:14 AM|
|stromer||I'd throw on some Viggen springs. They won't be awful with stock dampers, lower it only slightly for your rough roads, and should be acquired at a fair price.|
|07-15-2008 10:17 PM|
Lowering springs and brakes
Yesterday I decided to take the 900 to the shop since it was making some funky noises in the front end. $300 later and I still need two more things. Lowering springs and front rotors and pads. My front passenger spring is cracked/broken. Damn potholes in Upstate,NY!! I'm glad I sold the alessio rims when I did. And the NG must have sat a while before I bought it and it sat this winter...well new brakes and rotors at 74k now im at 88k and I have rusty, shitty rotors now. So here's what I wanna do.
-Buy some brembo (stock) rotors with some good metallic pads
-Get lowering springs
Trying to not break the bank with everything, but I want quality. Suggestions on lowering springs with the stock struts/shocks and pad suggestions. I want springs that will complement the stock struts because I am not going to be able to put in new shocks anytime soon. Oh and I plan on doing the brakes with a friend so that will help with labor a bit. and the shop next to me will take two hours putting the springs in total. Thanks guys!