|08-13-2016 06:54 AM|
|08-13-2016 06:45 AM|
|Cark||I know Jak Stoll used to talk a lot about waste gates being blown open under too much boost. The c900 guys were using helper springs and such to cure the problem... not sure that would be the issue at only 18-19 PSI?|
|08-13-2016 06:38 AM|
|08-13-2016 05:25 AM|
Never had any issues with fluttering. But also never ran at 18-19psi and very rarely even hit WOT.
|08-12-2016 12:21 PM|
I don't know, Jameson.
I have the base spring in my valve, and it's set up the way I said.
I have the recirc valve pressure line coming off the nipple with the fpr and the line that would come back from the solenoid capped on the throttlebody.
It works flawlessly.
|08-12-2016 09:05 AM|
Should I try and solve it, and how?
|08-12-2016 07:52 AM|
|g96nt||It means that the pressure on the top of the valve is not as high as in the pipe.|
|08-12-2016 06:19 AM|
New tune is in, 18-19psi, figured the green 15psi spring was not ideal. I put in the yellow 23psi spring.
I still get the flutter. However, I noticed it does not do it at WOT/100%, 50-90% I get the flutter. Wouldn't that point to a small vacuum leak causing the noise?
The only other thing I can thing of, there seems to be a bend/kink in the wastegate rod.
|07-30-2016 08:07 AM|
|07-29-2016 12:03 PM|
|07-29-2016 10:30 AM|
What's your boost source for the valve?
You're not using the solenoid, are you?
Going straight from the manifold to bpv, I hope!
|07-29-2016 07:03 AM|
I went and bought a gold 15-23 psi spring and will give that a try.
I did some boost logs and make a healthy 17.2psi in 2-3rd and 17.8 psi in 4th. It tapers a bit as expected at 6k, its more like 15ish.
|07-29-2016 06:12 AM|
You're fighting an up-hill battle if you have it installed incorrectly.
do you have it so the pressure from the vacuum hose is pushing the piston against the pressure of the charge-pipe?
(also, you won't need a heavy spring)
|07-29-2016 02:53 AM|
|turbojohnny||well?? how'd it go?|
|07-28-2016 02:03 PM|
|Jameson||Turns out I have the green spring which is rated 5-15psi. Cobalt people seem to great results with shimmed green springs holding 22psi with no issues. So off to Home Depot I go!|
|07-28-2016 06:55 AM|
All I know is, with some links that SRP sent of Turbo Cobalt owners running Forge BPVs, they all describe the exact sound and sensation I am getting. They all point to shims as the cure or uprated springs and or shims. So I will try a shim or two first.
|07-28-2016 06:39 AM|
|g96nt||hah... such strong opinions in that thread.|
|07-28-2016 05:56 AM|
|srp||Have a look at this: https://www.saablink.net/forum/perfor...-9-3/65634.htm|
|07-28-2016 05:25 AM|
How did you install the valve?
The stock way, or the right way?
|07-28-2016 02:45 AM|
|turbojohnny||I think your diagnosis is most likely correct. The BPV is going to be the first thing to let go at higher boost levels.|
|This thread has more than 20 replies. Click here to review the whole thread.|