|12-21-2004 12:32 PM|
|Boxerchip||yeahhhh like i said... 60-145 is just insane... its so fast... like uhhh my god ill just post a video later. lol|
|12-21-2004 12:28 PM|
Good for you, enjoy it. Glad it worked out.
yeah 60-onward is sick. once you get up to speed and get that cold air really blowing over the intercooler, it just pulls like a frieght train. There may be lots of cars that are quick 0-60 but not so many that can pull so damn hard @ 90+ and still have plenty of go left to give.
|12-21-2004 11:58 AM|
|Boxerchip||Videos will be up later...|
|12-21-2004 11:57 AM|
Ok i finally got my ECU to work. I am now Stage 3! its fast as balls!!!!!! jesus I was just out playing around with an M3.... all I can say is wow. ECU really makes a difference espically really low end and 60-145 its just like
anyway im siked
|11-09-2004 06:24 AM|
|11-09-2004 06:17 AM|
|Aerolike9||after i get my new rims, stage 4 SQR will be in my car.. if not sqr then nordic.. maptune just costs too much|
|11-05-2004 08:27 AM|
I know it is frustrating but they will fix it and when they do... hold on tight....I currently am having a "traction problem" due to cold temps allowing me so much boost. even broke the tires loose from about a 45 MPH roll today. my car likes this weather, the needle peaks all the way in the red and then backs off a bit, and then builds real smooth all the way to the end. don't have a long enough road to see how long i can peg it there, because by the time it reaches the end of the red I am going WAY TOO fast so i gotta brake... all those wet leaves on the ground are not helping traction either.
|11-05-2004 07:48 AM|
|Boxerchip||I had other air flow mods... nothing that would do this... but basically it just wont turn over when this ECU is in then the CEL comes on. looks like a security problem... but we are not sure exactly what it is....|
|11-05-2004 07:46 AM|
|mike saunders||This sucks.....Did you have any other mods (FPR, bigger injectors, etc) that Maptun didn't know about? Could they have missed something?|
|11-05-2004 07:38 AM|
|abdukted1456||it sounds like your software is probably OK, probably a bad connection in the ECU or bad soldering job? if the car ran and then shut down? just an idea.|
|11-05-2004 07:33 AM|
|xaamottomaax||Man, this is the second time we have heard of a Maptun ECU problem out of the box. Hopefully you will get it straight and be as happy as Abdukted is with his now.|
|11-05-2004 06:55 AM|
|Boxerchip||Ok, so I got my stage 3 ECU... Installed the FPR and plugged in the ECU, everything worked fine no CEL or anything. I started to drive went down the road a ways dident even get to see a full boost when i came to a stop light.... my car cuts off. I plug back in the stock ECU drive home and try the maptun again. it works for 20 seconds.... then stops. the stock ECU will still work but the after the fist time the maptun one cuts out it wont even start. I took it to a saab dealer to see if they could use Tech 2 and fix it. It did not work, he said the new ECU would not work. In addition to this my curent ECU i found out is EU spec. I dont even know where to begin... i just want my damn ECU working.|
|10-12-2004 04:34 PM|
|Boxerchip||I am not going to say what i payed because i got a discount due to my admin status.... I think they are like 1,100 normally... but call james at group 9 and ask him.|
|10-12-2004 03:51 PM|
|The Vigg||how much did you pay? I am looking at getting a stage 3 in the next month.|
|10-12-2004 11:35 AM|
|Boxerchip||ECU has shipped!!!! should be here soon... then the fun starts.|
|10-05-2004 10:40 AM|
|Boxerchip||I am getting a 3.5 bar fuel pressure regualtor but thats about all i know at this point... If anyone else can give us some more info on this that would be great.|
|10-05-2004 09:19 AM|
I just sent my Maptun stage 3 for my NG900 back for an upgrade " ".
I didn't know the Viggens required another regulator for s3, because mine didn't..... Any idea what rate of fuel is required?...must be extreme compared to what it is now.
|09-30-2004 08:08 AM|
cool, can't wait to see the dyno sheets!
you are gonna love this upgrade.
|09-30-2004 08:00 AM|
yeah Stage 3 was ordered and james sent the order to maptun now I just have to install that damn fuel pressure reg and i should be at around 280 HP and 340FTLBS
Hey.... as long as my car is faster than nicks lol
I will definatally run the dyno when i get the ECU In fact im going to do it once with the cone and once with a drop in because no one else seems to have that info.
Ill keep you guys posted... theres more to come.
|09-23-2004 07:13 AM|
|abdukted1456||judging by the big increase from my Maptun stage 1 on my lowly autobox SE, I am sure you will LOVE this upgrade. Let us know how it goes. prepare to see your boost guage pinned.|
|This thread has more than 20 replies. Click here to review the whole thread.|