|06-03-2015 03:10 PM|
|soccerrplyr||the 1999-2002 9-3 would reset themselves after a certain amount of cycles, the ng900 needed a tech 2. Not sure which the 9-5 follow|
|06-03-2015 09:39 AM|
If the only problem was that you powered the car on while the airbag connector was unplugged, then it will have to be reset with a Tech2 at a shop that can work on cars. The fault code is set in the SRS module, and the only way to re-set it after fixing a fault is with a Tech2.
If one of the seat mounted airbags is bad, the light will come back on, and there will be a code set for which airbag is faulty or disconnected.
|06-02-2015 10:26 PM|
Airbag light warning after replacing front seats
I was fixing seats and dismantled them.
Looks like i forgot to disconnect battery doing that.
Now starting engine Airbag light flashes on, turns off and after 1 sec flashes all the time.
How to turn it off?
All connections looks properly connected.