|05-18-2015 10:24 AM|
Your engine choices are limited, but 2nd hand suply should be plentiful if you're in europe.
Both the b205 and b235 are 2000-02 9-3 or 1997-2009 9-5
|05-18-2015 06:09 AM|
Easiest path is find another B205E and put it in. If you have access to a Tech-II or someone who can tune your car, B235E, TD04-15 and intercooler system, and ECU upgrade might be possible, depends on how much work you want to do.
|05-17-2015 07:42 PM|
sorry the car is a 1998 model, that is what the vin number says
Model: Saab 9-5 (9600)
Model Year: 1998
Body type: 4-door (4D)
Engine: B205E 4-inline, Turbo, PETROL, TURBO (B205 E)
and these are the cars that have good motors.
|05-09-2015 08:43 PM|
Those two engines are not interchangeable. Check your years again friend. There were no 9-5's in 1995, started making them in 1999.
You can use an engine from a 9-3, but only up to 2002 (or 2003 convertible). Those interchange with the 9-5 but as a 2.0 liter instead of the 9-5's 2.3 liter.
If you get a good deal on a 2.0 liter motor go for it. It will drive nearly the same at stock power levels.
|05-09-2015 02:49 PM|
|Jameson||Its not worth the effort. 9-5 B235 engines are so common. The 9-3 B207 has less displacement to work with and gives you more challenges than dropping in another B235. So getting less with more work makes little sense to me.|
|05-09-2015 07:57 AM|
Engine swap ?
hello i have been offered saab 9-5 1995 low pressure turbo, but the engine is bad, and i have found an engine from a saab 9-3 2005, can i put that engine in or is that just to much work ?