|02-22-2014 04:01 AM|
|02-21-2014 08:01 PM|
|02-21-2014 02:29 PM|
what? The early/late ones are pretty different.
same shape, but different bungs.
Have you looked at them? the newer one has a single, square sensor on the first bend, and a quick-release vacuum port on the last bend by the throttle body.
The older ones have a nipple on the underside of the first bend, and a boss for the temp sensor to screw in( I forget where the OE sensor sits)
I'm not sure what the quick-release on the newer ones is for. It's odd to me that it's pre-throttle-body.
|02-20-2014 11:11 AM|
|02-20-2014 11:10 AM|
|soccerrplyr||so then what's the difference for the 00 delivery pipes versus the 01+?|
|02-20-2014 07:30 AM|
EPC shows that the pipe for the '01 to '03 OG 9-3 is also used in the '01 to '10 9-5.
PN 51 91 770
|02-18-2014 03:24 PM|
|Drew in Houston||I think they're the same, 00, 01, and 02. The pre-2001's have separate pressure and temp sensors though so the 00's aren't the same as the 01/02 in both models. I think.|
|02-18-2014 03:22 PM|
|soccerrplyr||I'm taking about the pipe that goes from the throttle body to the bov and ic|
|02-18-2014 03:16 PM|
|Cark||I think the 99 9-5's may have had the really tiny one just like the 99 9-3's... but other than that they're all the same for 9-5/9-3 until they introduced the "king cobra" on the 06+ 9-5's.|
|02-18-2014 01:19 PM|
T7 delivery pipe question
Are the t7 delivery pipes on a 00-02 9-3 the same, very similar shape contour as the delivery pipe on a 99-02 9-5's?