|01-23-2014 10:03 AM|
|hondafanatic17||It's almost like the same kind of noise a cv joint makes when it goes bad. If I would help diagnosis I can make a video of the noise. I'm really hoping the engines not ruined. It only happens when it get into the 3000 rpm range in first and second or in neutral so I know it's not the transmission.|
|01-22-2014 05:48 PM|
Okay so I got to fixing a few little things on the car like broken vacuum lines, blown front motor mount, and the BPC valve was all messed up and not hooked up properly. As in it wasn't at all and the line from the waste gate was just feeding back into the turbo. The car it's self feels better, turbo seems to kick pretty good. But i still get some smoke, and I hear a clacking/clicking noise around 3 thousand rpm. Could this actually be major engine issue? Like rods or something? The cars issues right now are possibly still turbo, engine, and shifter linkage. Along with a list of general maintenance that needs done. Body wise it's flawless except for a small area of rust on the trunk lid. Would hate to abandon ship cause it's so clean exterior. Can someone point me in the right direction of what to look at next?
|01-02-2014 05:31 PM|
|01-02-2014 10:17 AM|
|Tweek's Turbos||The 9000 and the 900 have different style compressor hosings but it can be made to work. You just can't use the transision casting from the 900, you need a 90 elbo and some this and thats.|
|12-31-2013 06:43 PM|
|hondafanatic17||Sweet, now I just need to decide what I want to do, doesn't look like much more work to just install my tdo4 on it.|
|12-31-2013 04:41 PM|
Yes ,but you will need this stuff
05.11.2005: Saab NG900 Turbo Upgrade - photo.platonoff.com
Oh, and it might have to be reclocked for it to work on a 900 but not 100% on that
|12-31-2013 11:30 AM|
|hondafanatic17||Would a tdo4 work? I have on from my 9000 aero.|
|12-31-2013 08:30 AM|
|soccerrplyr||yes, you can get good used ones for around 100. Not a bad diy, just a lot of stuff to unbolt, coolant to refill. You can't really mess it up as everything has its own specific place and won't go anywhere else. You can do it from underneath the car or out of the hood. If out of the hood you'll take the manifold out with the turbo|
|12-31-2013 06:45 AM|
|hondafanatic17||Nope found a 94 2dr turbo, do they have a Garrett t 25?|
|12-31-2013 06:09 AM|
|12-30-2013 07:15 PM|
|hondafanatic17||Hey so I picked up my Saab today, but I think something is wrong with the turbo, in first and second gear if I don't go easy on the gas the whole car seems to just cut out, and also at higher rpms in first and second, like around 3 thousand it starts to make like clicking noise, and it's smoking really bad, from the turbo and exhaust. The engine is really smooth and the transmission feels great so I think I have a issue with the turbo. I stopped about 20 minutes down the road and just called a tow truck and had it hauled home. Didn't want to do anymore damage to whatever the problem maybe. I didn't noticed this on seeing the car Monday, most likely because it was raining pretty bad and didn't want to push it because the tires are baldish. Any suggestions on diagnosing the exact issue with it? Just pull the whole thing out i suppose? First time I've had any issues with a turbo on any Saab I've owned.|
|12-30-2013 06:29 PM|
V6 is less reliable, less power, less parts available, and there's less knowledge about them.
Hold out for a turbo. More fun and the gurus are knee deep.
|12-29-2013 06:15 AM|
Thanks for the info, I figured that there wouldn't be a whole lot of options tuning wise but I've never really been into doing anything mechanical wise except for maintenance. Just was trying to figure if they are horrible maintenance wise, like if having the bigger engine makes it harder to work on, parts anymore harder to come by/more expensive, etc...
Doesn't matter though just come across a 1994 900 2dr turbo with manual trans for 400 that needs a reverse gear so I'm just going to hop on that. It's way closer too.
|12-28-2013 08:15 AM|
|Snowcat77||On second thought I think it's traction control they had an option for, not limited slip|
|12-28-2013 08:03 AM|
It's not hard to find one with a turbo for just a little more money or the same/less if it needs a couple things is my take on it.
Also it barely makes more power than the 2.3 n/a and I'm guessing it's a bit heavier.
I guess a positive is iirc what I read on wiki the v6 SE had LSD as an option that wasn't available for the 2.0t so maybe check for that.
If your at all interested in tuning get a 2.0t the v6 isn't trionic.
I wonder what MPG they get. You can get 225 up stage 1 tune on the turbo models and still get 30mpg highway
|12-27-2013 07:58 PM|
Looking at a 900 with v6 for sale, option?
So I'm in the market for another car, and I've come across a rather clean and well kept(what I can tell so far from the ad and the owners I talked to) 95 900 SE v6 hatch with manual trans, 140k, new tires, new exhaust, and some other recently done maintenance. I've read up a little on the v6 and from my understanding is that they aren't a bad engine just they have a common issue with the timing chain/belt slipping and ruining the entire engine? The car is about two hours away from me but for 1000 dollars it's one of the nicer ones(maintenance and clean) cars I've found in that price range.
So opinion? Things to look for? Other issues with the v6? Any signs the engine would be giving if it needs any major work done right away?