Saab Link Forums banner

How do i put a nice and cheap air intake in..

2K views 9 replies 8 participants last post by  swedishassassin 
#1 ·
i want to know how to put one in nice and cheap but willll do the job aaaa if u ahve any ideas please messsaged me or leave a post thanks.. my car is a saab 900s well thats it... Eddie
 
#3 ·
(I moved ya over to the N/A Performance Mod for the 900/9-3section)

Another thing you can do is remove your airbox, and increase the size of the intake tube with some PVC pipe.

Your stock intake tube (plastic paper towel roll sized thing) is fairly restrictive.

Purchase some 3" inner diameter pvc pipe from a hardware store or Home depo.

Cut to a length a bit longer than stock tube.

Cut larger hole in lower portion of airbox. You will remove the original tube and create a hole large enought to insert the pvc pipe.

slide new pvc back and forth inside box to size it so it will fit in stock location. then cut the extra protruding into airbox.

Glue, and Paint, and throw in a nice K&N panel filter.​
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top