The Saab Link Forums

The Saab Link Forums (https://www.saablink.net/forum/index.php)
-   General Classic 900 Posts and Information (https://www.saablink.net/forum/forumdisplay.php?f=53)
-   -   Troubleshooting APC Solenoid. (https://www.saablink.net/forum/showthread.php?t=120386)

uncle_andy 04-30-2018 06:19 AM

Troubleshooting APC Solenoid.
 
Hi. I am having a no-boost situation with my son's '93 C900 Turbo. I have chased down and checked a lot of things, and I'm stuck at this point. APC Solenoid doesn't seem to be acting correctly-

I have read the APC troubleshooting guide, but something is unclear:

Quote:

7. Next check the APC solenoid by applying +12v to it; under power, the solenoid should snap. Check that it is fully functional by removing the vacuum lines from the "W" and "R" ports, and connecting a length of vacuum line to the "C" port. With no power applied, air passed through the "C" port will come out through the "W" port; with power applied, air passed through "C" will come out through "R".
Mine opens both "W" and "R" with power applied. I assume this means that it's failed?

Can anyone please verify?

mike d 05-01-2018 02:21 PM

im not sure what the native state of that solinoid is, however if it makes noise when you give it power its probably good.

i would start by checking for boost leaks or failed diverter valve. before electronics
Many small leaks can add up to one huge problem in c900's

engdahl 05-22-2019 10:46 AM

I myself am looking for an APC solenoid, part number 9342072?

Lee


All times are GMT -8. The time now is 03:34 AM.

Powered by vBulletin® Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.5.2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
All content is copyright The Saab Link and it's original authors.


Garage Plus vBulletin Plugins by Drive Thru Online, Inc.