The Saab Link Forums

The Saab Link Forums (https://www.saablink.net/forum/index.php)
-   General 99 and 90 Posts and Information (https://www.saablink.net/forum/forumdisplay.php?f=64)
-   -   Quinn's 99 Rally Car Project (https://www.saablink.net/forum/showthread.php?t=13916)

saabsbreakdown 01-01-2007 09:20 PM

Quinn's 99 Rally Car Project
 
So it's a 75 now, hense the new thread name. I left out a year designation incase I change my mind again, but I doubt I will! :)

It's a 75 and it just needs a slave cylinder, and uh, paint! All the lights are in the trunk.

http://i99.photobucket.com/albums/l3...9frontpass.jpg

http://i99.photobucket.com/albums/l3...rontdriver.jpg

http://i99.photobucket.com/albums/l3...reardriver.jpg

http://i99.photobucket.com/albums/l3...99interior.jpg

http://i99.photobucket.com/albums/l3...9interior2.jpg

So who wants to buy the interior? :lol:

CooperS7777 01-01-2007 09:28 PM

Pimpin' - especially the interior. What are the plans for it?

saabsbreakdown 01-01-2007 09:32 PM

Plans include:

Slave Cylinder
John Deere Blitz Black
Roll Cage
Rear Sway Bar
Rally Tires
Bailing wire to hold up muffler.

That is the complete list and should secure me a podium finish!!

Interior will come out, racing seats and harnesses etc will go in.. but you get the picture. This car will be almost totally stock for my first rally.

Red DIC 01-01-2007 11:28 PM

I like it

AeroDynamic 01-02-2007 08:18 AM

when did that thing show up at the house?? hmmm....

Are you painting my car too??

bozs13 01-02-2007 08:20 AM

how much do those cars go for? I need a beater and am thinking about an old Saab.

AeroDynamic 01-02-2007 08:29 AM

im sure it was free, or not far from it. Quinn doesnt normally spend much on cars. ;) lol

bozs13 01-02-2007 08:30 AM

Quote:

Originally Posted by AeroDynamic (Post 194830)
im sure it was free, or not far from it. Quinn doesnt normally spend much on cars. ;) lol

:) I know, but how much do they USUALLY go for :) I'm not as lucky as quinn :)

I don't care how beat up it is, just a piece of crap to drive until my primary car is done

DeLorean 01-02-2007 10:46 AM

looking nice ;) When are the power heated memory seats coming?

PaulH 01-02-2007 11:07 AM

blitz black FTW! thats gonna be badass.

Paul

saabsbreakdown 01-02-2007 06:46 PM

You can't find rust free 99's on the east coast. So it doesn't matter how much they cost.

It was 200.

Kaylan, blitz black is a tractor paint. Its flat black. As in not shiny, not red, and not carbon fiber. So it won't match your camera phone or anything in your room. Like, oh my god!

VWSAABVT 01-02-2007 06:49 PM

Rofl

codesplice 01-02-2007 06:56 PM

Quote:

Originally Posted by saabsbreakdown (Post 195139)
Kaylan, blitz black is a tractor paint. Its flat black. As in not shiny, not red, and not carbon fiber. So it won't match your camera phone or anything in your room. Like, oh my god!


Hahaha, fuckin' a.

Looks like a nice project car there man. I'll be looking forward to the updates :)

bozs13 01-02-2007 07:17 PM

Quote:

Originally Posted by saabsbreakdown (Post 195139)
Kaylan, blitz black is a tractor paint. Its flat black. As in not shiny, not red, and not carbon fiber. So it won't match your camera phone or anything in your room. Like, oh my god!

haha, hmmmm...that sounds familiar :)

AeroDynamic 01-02-2007 07:26 PM

i like flat black ass clown. fine i will just keep mine shiney then :roll:

codesplice 01-02-2007 08:56 PM

Haha... ass clown. I like that one.

saabsbreakdown 01-02-2007 11:11 PM

yeah. thanks michael bolton

drewz airflow se 01-02-2007 11:25 PM

Quote:

Originally Posted by saabsbreakdown (Post 195139)
You can't find rust free 99's on the east coast. So it doesn't matter how much they cost.

It was 200.

Kaylan, blitz black is a tractor paint. Its flat black. As in not shiny, not red, and not carbon fiber. So it won't match your camera phone or anything in your room. Like, oh my god!

Quote:

Originally Posted by AeroDynamic (Post 195167)
i like flat black ass clown. fine i will just keep mine shiney then :roll:

haha

saabsbreakdown 01-03-2007 02:46 PM

The slave cylinder replacement is going far easier than I imagined.

I'm using two M8 x 40mm bolts and 2 nuts to force the pressure plate assembly away from the flywheel. After getting it compressed, an old broken coil wire fit right in.

Now I'm going to lift the radiator up and out of the way so I can get the splined shaft out.

I hate to say it, but Saab Central has helped alot with this project. I only hope the 99 board here is as informative one day as the one of SC is now.

AeroDynamic 01-03-2007 02:51 PM

Quote:

Originally Posted by saabsbreakdown (Post 195526)
The slave cylinder replacement is going far easier than I imagined.

I'm using two M8 x 40mm bolts and 2 nuts to force the pressure plate assembly away from the flywheel. After getting it compressed, an old broken coil wire fit right in.

Now I'm going to lift the radiator up and out of the way so I can get the splined shaft out.

I hate to say it, but Saab Central has helped alot with this project. I only hope the 99 board here is as informative one day as the one of SC is now.

now, you must die. :-|


All times are GMT -8. The time now is 08:01 AM.

Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.5.2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
All content is copyright The Saab Link and it's original authors.


Garage Plus vBulletin Plugins by Drive Thru Online, Inc.