The Saab Link Forums - View Single Post - 1996 900SE w/ 300mm rear brakes-doable?
View Single Post
Old 05-11-2008, 11:02 AM   #4
Tweek's Turbos
Tweek's Turbos's Avatar
Join Date: Dec 2003
Location: Northern VA
Posts: 10,303
Send a message via AIM to Tweek's Turbos
Easy as pie.

Like other said, you will need to find the hubs which thankfully are assemblies. So you wont need to press fit them on and off.

Find any 97+900 or 9-3. remove the brake Bull ish to make them lighter, and just undo the 4 bolts where they meet the axle. Unplug, and tap them out.

Just remember you will need to cut your dust shield too. Dip, has a great write up, so does PhilipHS. And both Bullseye and myself have a small thread on the subject.

To find out if you have the smaller hubs, find a used 9-5 or later 900/9-3 used brake rotor and see if it fits on.
Originally Posted by Delorean
- pretend you are watering delicate plants...
Originally Posted by SAABseanSCANIA
can be prone to failure due to increased localized stresses in the hole penetrations
Tweek's Turbos is offline   Reply With Quote